Dell VxRail VP-760 Manual page 39

Option
UEFI PXE Settings
Number of PXE
Devices
PXE Device n (n = 1
to 4)
PXE Device n
Settings (n = 1 to 4)
UEFI HTTP Settings
HTTP Device n (n = 1
to 4)
HTTP Device n
Settings (n = 1 to 4)
UEFI iSCSI Settings
iSCSI Initiator Name
iSCSI Device1
iSCSI Device1
Settings
UEFI NVMe-oF
Settings
NVMe-oF
NVMe-oF Host NQN
NVMe-oF Host Id
Host Security Key
Path
NVMe-oF SubSystem
Settings
Integrated devices
In the BIOS, access Integrated Devices to view details.
1. To view the Integrated Devices screen, power on the system and press F2.
2. Click System Setup Main Menu, System BIOS, and then Integrated Devices.
Option
User Accessible USB Ports
Description
Controls the configuration of the UEFI PXE device.
Specifies the number of PXE devices. This option is set to 4 by default.
This option enables or disables the device. When enabled, a UEFI PXE boot option is created for
the device.
Controls the configuration of the PXE device.
Controls the configuration of the UEFI HTTP device.
This option enables or disables the device. When enabled, a UEFI HTTP boot option is created for
the device.
Controls the configuration of the HTTP device.
Controls the configuration of the iSCSI device.
Specifies the name of the iSCSI initiator in IQN format.
This option enables or disables the iSCSI device. When disabled, a UEFI boot option is created for
the iSCSI device automatically. This option is set to Disabled by default.
Controls the configuration of the iSCSI device.
Controls the configuration of the NVMe-oF devices.
This option enables or disables the NVMe-oF feature. When enabled, it allows you to configure
the host and target parameters that are needed for fabric connection. This option is set to
Disabled by default.
This field specifies the name of the NVMe-oF host NQN. Input is allowed using
the following format: nqn.yyyy-mm.<Reserved Domain Name>:<Unique String>.
Leave this field empty if you intend to use the system-generated value with the
nqn.1988-11.com.dell:<Model name>.<Model number>.<Service Tag> format.
This field specifies a 16-byte value of the NVMe-oF host identifier that uniquely identifies this
host with the controller in the NVM subsystem. The input that is allowed is a hexadecimal-
encoded string that uses the 00112233-4455-6677-8899-aabbccddeeff format. To use
the system-generated value, leave the field empty.
NOTE: A value of all FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF is not allowed.
This field specifies the Host security key path.
This field controls the parameters for the NVMe-oF subsystem n connections.
Description
Configures the user accessible USB ports. Select Only Back Ports On to disable
the front USB ports. Select All Ports Off to disable all front, and back USB ports.
Select All Ports Off (Dynamic) to disable all front and back USB ports during
Pre-operating system management applications 39