Pgm Board Tf Card Update - RGBlink M3 Upgrade Manual

3. PGM Board TF Card Update

If M3 effect mask images are lost,you need re-upgrade the contents in "PGM Board
TF Card" . The upgrade steps as follows:
3.1. Take out the TF card as the red circle shows:
3.2. Plug it to SD card or TF card reader；
3.3. Push the SD card（or card reader) to the PC，delete the old content and copy
the new one's folder"EFFECT","IMAGE","LOGO","OSD","STILL" and 255.bmp file
to the TF card root directory.
3.4. After that put the TF card back to PGM board.
Address：S603.604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian P.R.C
Tel：4008 592 315
Email: support@rgblink.com
Fax：+86 592 5788216
http://www.rgblink.com
4 / 4