Samsung AQ09NSA Service Manual page 30

Operating Instructions and Installation
No Parts
2 Fan
&
Motor
3 Heat Exchanger
4 Compressor
4-5
Procedure
1) Remove the Nut Flange.
(Turn to the clockwise)
2) Separate the Fan.
3) Loosen 4 fixing screws to separate the
Motor.
4) Loosen 2 fixing screws and separate the
Motor Bracket from the Base.
1) Loosen 2 fixing screws of left and right side.
2) Disassemble the inlet and outlet pipe by
welding.
3) Separate the Heat Exchanger.
1) Open the Terminal Cover of Compressor and
unscrew the Connection Terminal.
2) Disassemble the inlet and outlet pipe of
Compressor by welding.
3) Loosen 3 bolts of the lower part.
4) Separate the Compressor.
Remark
Samsung Electronics