Samsung AQ09NSA Service Manual page 28

Disassembly and Reassembly
No Parts
4 Heat Exchanger
5 Fan Motor
&
Cross Fan
4-3
Procedure
1) Loosen 2 fixing earth screws of right side.
2) Detach the Connection Pipe.
3) Detach the Holder Pipe at the rear side.
4) Loosen the 4 fixing screws of right and left
side.
5) Lifting the Heat Exchanger up a little to
push the up side for separation from the
indoor unit.
1) Loosen the fixing screw.
2) Detach the Fan Motor from the Fan.
3) Detach the Fan From the left Holder
Bearing.
Remark
Samsung Electronics