Advertisement
Open the software ——"UPDATE FOR 2AXIS GIMBAL" 。
3.
4.
Software interface is shown in following picture.：
5.
Choose the correct port number and the correct baud rate-115200, then
click OPEN button to open the com port.(The serial port number should be
the same as the port number which checked in step 2, for example COM4).
6. The Micro-USB terminal connect to the function interface(Micro-USB
interface) on the gimbal, power on the gimbal . After connect successful,
the software will reminder the connection status and read out the current
version (For example "LINK OK! VERSION 2.14"),
Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd.
http://www.feiyu-tech.com
- 2 -
service@feiyu-tech.com
Advertisement
