Advertisement
Quick Links
G6 Plus Gimbal Firmware Upgrade Manual
Attention
● Please get G6 Plus ready, along with USB cable, USB connector and computer before
operating.
● This software is just compatible with Windows operation system.
● Please do not press any other buttons except the ones indicated by the instructions
during upgrade.
● Please insert the battery before upgrading.
● Connect micro USB cable to USB connector as indicated by the following before
operating.
Steps
1. Download the USB driver from Feiyu official website
it. Next, download the upgrade software and the firmware for G6 Plus.
2. Connect USB connector to USB port of the computer. Then check port number in
Device Manager. If the COM number is more than COM10, please modify it to the
available number which is within COM10.
Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com service@feiyu-tech.com
Guilin Feiyu Technology Incorporated Company
for Windows
- 1 -
www.feiyu-tech.com
then install
Advertisement
Related Manuals for Feiyu G6 Plus
Summary of Contents for Feiyu G6 Plus
- Page 1 G6 Plus Gimbal Firmware Upgrade Manual for Windows Attention ● Please get G6 Plus ready, along with USB cable, USB connector and computer before operating. ● This software is just compatible with Windows operation system. ● Please do not press any other buttons except the ones indicated by the instructions during upgrade.
- Page 2 4. Choose right port number and baud rate as 115200, then click on OPEN COM button to open COM port. Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com service@feiyu-tech.com - 2 -...
- Page 3 Guilin Feiyu Technology Incorporated Company 5. Connect G6 Plus to USB cable that has connected with USB connector, the connection between the gimbal and the computer will be established automatically, and the connection status shows up. 6. Click on OPEN FILE button and choose right firmware.
- Page 4 7. Click on UPDATE START button to start upgrading, the process will display on the software. 8. When all the blocks of the firmware are sent, click on OK button to finish upgrade. Next, click on CLOSE button then unplug USB cable. Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com service@feiyu-tech.com - 4 -...
- Page 5 Guilin Feiyu Technology Incorporated Company 9. Turn to upgrade firmware of gimbal. 10. Choose right port number and baud rate as 115200, then click on OPEN to open COM port. Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com service@feiyu-tech.com - 5 -...
- Page 6 Guilin Feiyu Technology Incorporated Company 11. Connect G6 Plus to USB cable that has connected with USB connector, the connection between the gimbal and the computer will be established automatically, and the connection status shows up. 12. Click on OPEN FILE button and choose right firmware.
- Page 7 14. Click on UPDATE START button to start upgrading, the process will display on the software. Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com service@feiyu-tech.com - 7 -...
- Page 8 15. When all the blocks of the firmware are sent, click on OK button to finish upgrade. Next, click on CLOSE button then unplug USB cable and power off the gimbal. Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com service@feiyu-tech.com - 8 -...
- Page 9 —— —— Note: We reserve the right to change this manual at any time! Also, the latest edition will be shown on our official website www.feiyu-tech.com. Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com service@feiyu-tech.com - 9 -...