Feiyu FY G4S Firmware Upgrade Manual

3-axis handheld gimbal

Download this manual

FY G4S 3-Axis Handheld Gimbal

Firmware Upgrade Manual

Attention :

 Please do not operate the function button when in upgrading.

 The firmware upgrade software only supports the Windows

operation system provisionally.

 Please operation step by step strictly and make sure click the

OPEN button to open the com port before the USB Mini terminal

of the USB cable connect to the gimbal.

 If you want to get the current version of the gimbal, please execute

step 1~6.

Please refer to the following connection diagram, connect the USB cable to the

USB connecter before upgrading.

Download

http://www.feyu-tech.com

upgrade software and the firmware for gimbal.

After successful install the USB driver, please refer to the above

connection diagram, connect the USB cable to the USB connector then insert

Guilin Feiyu Electronic Technology Co., Ltd

Guilin Feiyu Electronic Technology Co., Ltd.

the

USB

driver

and install. Then download the dedicated firmware

http://www.feiyu-tech.com

- 1 -

from

FY-TECH

service@feiyu-tech.com

official

website

Page 1 Guilin Feiyu Electronic Technology Co., Ltd. FY G4S 3-Axis Handheld Gimbal Firmware Upgrade Manual Attention :  Please do not operate the function button when in upgrading.  The firmware upgrade software only supports the Windows operation system provisionally.  Please operation step by step strictly and make sure click the OPEN button to open the com port before the USB Mini terminal of the USB cable connect to the gimbal.
Page 2 Guilin Feiyu Electronic Technology Co., Ltd. the USB connector to the computer. Confirm the port number in device manager (If the port number is more than COM10 , please modify to the available number which within COM10 ). Open the software ——“UPDATE FOR 3AXIS”。...
Page 3 Guilin Feiyu Electronic Technology Co., Ltd. The Mini-USB terminal connect to the function interface on the gimbal, single tap the function button of the gimbal, the LED of it will keep flashing. After connect successful, the software will reminder the connection status and read out the current version (For example “LINK...
Page 4 Guilin Feiyu Electronic Technology Co., Ltd. Click on UPDATE button to start upgrading, the process will display on the software. Data of firmware being sent to the gimbal completely, please click Confirm button to finish the upgrade, close the software then remove the USB cable.