Perlick HP15 Manual page 3

OPERATION 3: ATTACHING MOUNTING PLATE
CAUTION: THESE CABINETS ARE EXTREMELY HEAVY. ENSURE THAT YOU HAVE ENOUGH PEOPLE
ON HAND TO HELP REPOSITIONING THE UNIT SO IT CAN BE DONE SAFELY AND WITHOUT DAMAGE.
1. WHILE CABINET LAYING ON ITS BACK, BRING MOUNTING PLATE AND ALIGN IT TO THREADED HOLES WHERE
LEG LEVELERS WERE REMOVED IN STEP 2. THE FLANGE SHOULD BE POINTING AWAY FROM THE UNIT.
2. UTILIZING A PHILLIPS HEAD SCREWDRIVER. SECURE MOUNTING PLATE BY FASTENING 1/4-20 MACHINE
SCREWS (4X) PROVIDED IN KIT.
OPERATION 4: STACKING UPPER UNIT ONTO LOWER UNIT
CAUTION: THESE CABINETS ARE EXTREMELY HEAVY. ENSURE THAT YOU HAVE ENOUGH PEOPLE
ON HAND TO HELP REPOSITIONING THE UNIT SO IT CAN BE DONE SAFELY AND WITHOUT DAMAGE.
1. PLACE UPPER UNIT ON TOP OF LOWER UNIT. ALIGN FLANGE HOLES WITH THE RIVET HOLES PREVIOUSLY DRILLED.
2. UTILIZING A PHILIPS HEAD SCREWDRIVER, SECURE UPPER UNIT BY FASTENING #10 SCREWS PROVIDED IN KIT.
ALIGNMENT SHOWN
NOTE: TO PREVENT DAMAGE TO THE COMPRESSOR, WAIT 24
HOURS BEFORE POWERING ON UNIT AFTER TURNING THE
CABINET BACK TO ITS UPRIGHT POSITION.
3/3/2022
FLANGE
SCREWS (4X)
SCREWS (2X)
3