AEMC 6416 User Manual page 12

1.800.561.8187
Item Description
8 Signal indicating potentially hazardous voltage. Blinks when the
contact voltage exceeds 50 V.
9 Alarm threshold high/low indicator (operational use or
AL Alarm threshold adjustment mode or Alarm function.
10 Alarm threshold display:
- Display of one of the alarms (1000-count display) with units.
display mode.
(A for A.M., P for P.M. or 24H) in SET-UP
(see § 4.4, menu #8).
11
resistance impedance, voltage, or current, depending on the
measurement chosen (
- A: Current measurement alarm.
- : Resistance measurement alarm.
- V: Voltage measurement alarm.
12 Unit of the central measurement display:
- V: Contact voltage measurement unit.
- : Impedance measurement unit. Symbol used for
impedances at the measurement frequency, for impedances
referred to the network frequency, or for the resistive component.
13 Unit of the top measurement display:
- mH: Loop inductance measurement unit.
- mA or A: Current measurement unit.
14 Upper display: 4000-count current measurement and 500-count
loop inductance measurement (Advanced mode).
15 Battery charge indicator:
- Not displayed: Batteries charged.
- Blinking: Batteries low. The device remains functional, but the
batteries will have to be replaced soon.
- Steady: Batteries discharged. The display indicates Lo bat. It is
parameters.
Clamp-on Ground Resistance Tester Model 6416
www.
information@itm.com
.com