LOGICOM FLOW Quick Start Manual page 8

Charging the battery:
To charge the battery, plug the USB cable (supplied) into the USB port
•
on your smartphone. Then connect the cable to a USB port or an AC
adapter (supplied) to a power outlet.
The battery charge icon lights up during charging to indicate the
•
charging status. If the temperature of the battery exceeds 45°C, the
battery can no longer be charged.
When the battery is fully charged, you can remove the USB cable from
•
the device.
5. Use of the smartphone
If you have any questions about the use of your smartphone, please contact
us at the following address:
https://support.google.com/android
IMPORTANT:
The smartphone is charged only via its USB port.
•
Make sure your smartphone battery is completely empty before
•
charging it for the first time.
The battery should be charged for at least 5 to 8 hours on the first
•
charge.
After being stored for a prolonged period, it may be necessary to charge
•
and empty the battery several times for maximum performance.
Note: You can use the device while it is charging. The battery
may then take longer to fully charge.
Precautions to be taken when charging the
battery:
Only use the USB cable supplied with your appliance to charge the
•
battery. Do not use any other power supplies or electrical devices.
The USB socket to which the appliance is connected must be installed
•
near the equipment and must always be within easy access.
Always wait at least 5 seconds after switching off the device before
•
restarting it. Turning the appliance off and immediately back on again
can damage electrical circuits.
8