Settings For "Internet Connection Firewall" For Windows Xp Sp1 - Sony DVP-NW50 User Manual

Setup 4: Setting up "Server Setup, powered by DiXiM" (continued)
(Reference) Networking ports used by
"Server Setup, powered by DiXiM"
The "Server Setup, powered by DiXiM" uses following
ports for communication. The configuration of Windows
Firewall described on pages 14 to 16 allows DiXiM
communications to use these ports.
If you are using a firewall program other than Windows
Firewall, configure your firewall software to allow the use
of the ports described in the following table.
Program Feature file name
1
dmsiwu.exe* DiXiM SSDP Discovery
DiXiM Media Server
Device
DiXiM Media Server
HTTP
1
* If you did not change the destination folder when you installed
the software, "Server Setup, powered by DiXiM," it is installed
in:
C:\Program Files\DigiOn\Media Server for In-Wall Unit\
Settings for "Internet Connection
Firewall" for Windows XP SP1
Windows XP SP1 (Service Pack 1) includes a network
firewall feature called "Internet Connection Firewall" that
improves security when you connect your computer to a
network. These new features also affect the DiXiM home
network.
To be able to connect devices across your network to share
contents, while maintaining an appropriate level of network
security, make sure that Internet Connection Firewall is
configured as described in the following procedure.
1
Click "Start" on the Windows taskbar to select
"Control Panel."
2
Click the "Network and Internet Connection" in the
"Pick a category" window.
If you have changed "Control Panel" to classic view,
double-click the "Network Connection," and go to step
4.
The "Network and Internet Connections" window
appears.
Port Protocol
number
1900 UDP
30000 TCP
30001 TCP
3
Click "Network Connections."
4
Double-click "Local Area Connection."
If you use a connection method other than "Local Area
Connection," open the connection icon you are actually
use, and match the following explanation to connection
method you use.
The "Local Area Connection Status" window appears.
5
Click the "General" tab, and click "Properties."
The "Local Area Connection Properties" window
appears.
Continue to the next page l
Chapter 1
17
Getting Started