Starting The Media Server; Naming The Media Server - Sony DVP-NW50 User Manual

Setup 4: Setting up "Server Setup, powered by DiXiM" (continued)
Basic Operations for the "Server Setup,
powered by DiXiM" window.
To activate settings changes
Click "OK" or "Apply."
If you click "OK," the setting changes take effect, and the
"Server Setup, powered by DiXiM" quits.
If you click "Apply," the setting changes take effect
immediately, but the "Server Setup, powered by DiXiM"
remains open, enabling you to make additional setting
changes.
However, the setting will be activated immediately when
you add or delete the shared folder as the "Shared Folder"
tab is selected.
To cancel the settings
Click "Cancel."
The setting that you are entering will be deleted and the
previous settings retained. The "Server Setup, powered by
DiXiM" will shut down at the same time.
However, the setting will be activated immediately when
you add or delete the shared folder as the "Shared Folder"
tab is selected.

Starting the Media Server

1
Click the "Start/Stop Server" tab on the "Server
Setup, powered by DiXiM" window.
The Media Server operating status appears on the right
side of the window.
Media server is not operating whenever "Start Media
server" is displayed on the "Server Setup, powered by
DiXiM" window.
The Media server is operating whenever "Stop Media
Server" is displayed on the "Server Setup, powered by
DiXiM" window.
2
Click "Start Media server."
"Starting Media Server" appears.
When the Media Server starts up, "Media Server is
running" appears.
To stop the Media Server
Click "Stop the server."
"Stopping Media Server" appears.
When the Media Server stops, "Media Server is being
stopped" appears.
Tip
The Media Server starts automatically when the "Server
Setup, powered by DiXiM" is started.

Naming the Media Server

1
Click the "Media Server Name" tab on the "Server
Setup, powered by DiXiM" window.
Continue to the next page l
Chapter 1
22
Getting Started