7.2.4 Colour macros
This setting is only relevant if the device is not controlled via a DMX controller.
1.
Press [MENU] to activate the main menu.
2.
Press [UP] or [DOWN] until the display shows 'Mode' and confirm with [ENTER].
3.
Press [UP] or [DOWN] until the display shows 'Macro' and confirm with [ENTER].
The following table shows the setting options.
Menu level 2
'Macro'
4.
When the display shows the desired value, confirm with [ENTER].
Menu level 3
Menu level 4
'Dimmer'
'000' ... '255'
'Strobe'
'000' ... '255'
'Macro'
'00' ... '22'
Operating
Function
Total brightness of
the colour macros
Flash frequency of
the strobe effect
Selecting the
colour macros
ShineBar 240
27
LED Bar