Quick Set-Up Using The Mito Red Light App - mitoredlight MitoADAPT Quick Start Manual

Quick set-up using the Mito Red Light app

Yes, we have an app so you can control your MitoADAPT from your mobile
device.
Unbox your panel, plug in the power cord, and turn on the
power switch. If you have multiple devices please make
sure the panels are connected before starting the session.
Make sure the
function is enabled on your
primary device.
Download the Mito Red Light app using the QR codes
below! Start the app and fill out the brief onboarding
questions. Accept permissions and make sure the
Bluetooth on your mobile device is turned on.
Select one of the 11 modes, and follow the prompts.
If you need to stop your session, press 'Stop' on your app or
press 'Go' on the main panel.
Note: Modes 9, 10, and 11 are near infrared light only. NIR
light is invisible to the naked eye so it may appear that the
session is not running. Please rest assured that significant
light energy is being emitted from the panel.
www.mitoredlight.com
Bluetooth