Usage Guidelines; Modes; Troubleshooting - mitoredlight MitoADAPT Quick Start Manual

Usage Guidelines

For first time users, we recommend starting out with 2-3 minute sessions per
area (at a distance of 6-18 inches) and slowly working up to a 10-minute
session over the course of 2-3 weeks as your body acclimates to the light. We
recommend wearing the included eye protection when facing the panel.

Modes

We recommend starting with Mode 1 as you get acclimated to the light. Then
we recommend rotating your sessions through Modes 1-6 (i.e. one day do a
session with Mode 1, the next session use Mode 2, etc).
Modes 1 though Mode 6 are various combinations of Red (peak 630nm &
660nm) and NIR (peak 810nm & 850nm) light. See the user manual for a
summary of the modes.
Modes 7-10 have only 50% of the LEDs lit and can be used for gentler sessions.
Mode 11 is 100% NIR and is available only through the app.

Troubleshooting

If the control panel is not working, make sure you are connected to power and
that the power switch on the back of the device is turned on.
When resetting the Default Time on the Settings Screen, after the time is
selected hit the 'GO" button then turn the power switch off then back on.
If there is no light coming from the panel when the session is started, confirm
that the brightness is not set to 0% (also note that NIR light 830nm/850nm is
invisible to the naked eye).
If app will not connect, make sure you are within 5 feet of the panel, close the
app on your device and restart. Turn the panel off and on. Make sure your
Bluetooth is enabled on your mobile device and your panel.
www.mitoredlight.com