CONTENTS Introduction ........................03 What’s included ......................05 Instructions ........................06 Specifications and disposal ................08 Cautions and disclaimer ..................09 Warranty and maintenance ................10 About us ..........................11...
Nasal probes may develop skin allergies or irritation if exposed to soap, sweat, allergens, or contaminants for extended periods. Please do not attempt to disassemble, repair, or modify this machine yourself. Avoid contacting the device with chemicals such as gasoline, cleaning solvents, propanol, alcohol, or insect repellent. www.mitoredlight.com...
Page 4
Which may help reduce nasal tissue swelling, improve nasal airflow, decrease histamine release from mast cells, and alleviate nasal allergic reactions. Warning: Do not shine the nasal probe directly into your eyes. www.mitoredlight.com...
See Figure 1. Once the assembly is complete, connect one end of the nasal irradiation probe to the control main unit, and insert the other end into the nasal cavity. See Figure 2. www.mitoredlight.com...
Page 7
When the indicator displays low battery, it is time to recharge your unit. Use the provided USB cord and connect to a USB adapt (not provided) to charge your unit to full charge and then remove from the charger to preserve the life of your unit. www.mitoredlight.com...
Lithium battery voltage | DC 3.7V - 4.2V Disposal Warning: this device contains a sealed lithium-ion battery pack. Please recycle the device responsibly through an appropriate electronic recycling facility that can properly dispose of and recycle devices containing lithium batteries. www.mitoredlight.com...
Mito Red Light makes no claims or representations or otherwise warranties regarding the ability of this product to cure any physical or mental conditions. A qualified health professional should always be consulted prior to using this product in regards to any condition that may requires medical attention. www.mitoredlight.com...
The battery capacity grid will begin to flash when battery levels low. This indicates device should recharged. The lifetime of the Lithium lon Battery can be maximized by allowing it to fully charge and then fully discharge during regular use. www.mitoredlight.com...
If you have any further questions, please feel free to contact us at: info@mitoredlight.com You can also call our phone number Monday - Friday 9am - 5pm MST...
Page 12
User Manual and Instructional Videos This user manual and instructional videos can be found here: https://mitoredlight.com/pages/user-manual Updated July 2024 www.mitoredlight.com...
Need help?
Do you have a question about the RTS-II and is the answer not in the manual?
Questions and answers