Mito Red Light was brought into existence in order to provide consumers truly affordable, yet highly effective red light therapy options. If you have any further questions, please feel free to contact us at: info@mitoredlight.com You can also call our phone number Monday - Friday 9am - 5pm MST...
8 for a summary of the modes. STANDARD USE Modes 7-10 have only 50% of the LEDs lit and can be used for gentler sessions. MitoADAPT Series: We recommend Mode 11 is 100% NIR and is limited to 10-minute sessions at 6-12 inches from consecutive...
Recent Burns - Recent burns may still fully understood and light sensitive cells contain residual thermal energy that in the eyes may respond unfavorably may be increased by heat from red to intense red light. light therapy. www.mitoredlight.com...
Page 7
A smaller amount of red light may actually reach deeper tissues, however, this effect is not likely to be large. www.mitoredlight.com...
Page 8
However, in rare instances users can experience the opposite effect. We suggest starting slowly and using red light only if this is a concern. A detailed discussion of this can be found in our article: Red Light Therapy & Hyperpigmentation. www.mitoredlight.com...
If you experience these types of issues, a licensed healthcare professional we recommend stopping use until the before using a device like Mito Red. symptoms go away. Then start out at 2-3 minutes per session area and work www.mitoredlight.com...
Page 10
WHAT IF MY SKIN IS BURNED OR done under adult supervision. DAMAGED? Red light therapy has been clinically- proven to help damaged skin heal from cuts, burns, and other blemishes. We recommend consulting with your healthcare provider if you have any concerns. www.mitoredlight.com...
Page 11
Users with a history of facial fillers and/ or Botox injections should consult their dermatologist prior to use. Users with breast implants should consult their plastic surgeon prior to use. Do not use the device during the healing period post Lasik eye surgery. www.mitoredlight.com...
GETTING STARTED: MitoADAPT Series Step 1: Unbox your MitoADAPT device Attach steel cables and hang and accessories (some accessories are not used for single panel configuration). OR, Plug in device using the provided power cord and turn the power switch ON (orange switch).
CONNECTING MULTIPLE PANELS: MitoADAPT Series Step 2: Connect the linking cable from Step 1: Plug one of the normal power the port marked ‘OUT’ on your main cords into a panel (suggest a panel panel and connect to the port marked lower to the ground / closer to an outlet).
Page 14
CONNECTING MULTIPLE PANELS: MitoADAPT Series Attach the steel cable by threading each end onto your larger panel. The smaller panel should always be hung from the bottom of the larger panel. Connect the smaller panel to the bottom of the larger panel by lifting the...
PANEL CONTROLS: MitoADAPT Series Once your panel is plugged in and powered on, the home screen will appear. Using the ‘+’ and ‘-’ buttons you can adjust the time for the current session. If all the other settings look good, press ‘GO’ to start and stop your session.
Download our the Mito Red Light app by searching the app store, using the link or by scanning the QR codes below! https://apps.apple.com/us/app/ https://play.google.com/store/apps/ mitoredlight/id1639752291 details?id=com.mitoredlight&pli=1 www.mitoredlight.com...
Page 19
Your feedback is accepted the app will not connect to greatly appreciated! your device. Once your mode is selected, adjust Select one of the 11 modes. your time and brightness settings then hit the start button to begin your session. www.mitoredlight.com...
Make sure your Bluetooth permissions are accepted through your devices’ settings. Ensure Bluetooth is enabled on your mobile device and your panel. You can also access this User Manual via the app by clicking the settings icon. www.mitoredlight.com...
Step 1: The stand may be rigid when Step 2: Pull back from top to extend you first receive your light. the stand. Step 3: To open, firmly push up as Step 4: Flip over light and you are shown. ready to go! www.mitoredlight.com...
Page 22
Step 2: Remove four screws from part of stand with screwdriver. the inner plate. Stand can now be removed from the light. Step 3: After removing screws grasp Step 4: Remove rubber feet with stand cover and lift straight up. screwdriver. www.mitoredlight.com...
If you remember high school physics, when you pass white light through a prism it separates out the different colors based on their wavelengths (ROYGBIV). Only a tiny part of this spectrum (roughly 400nm to 700nm) is actually visible to the human eye. www.mitoredlight.com...
Page 29
There have now been literally thousands into the brain! of studies done in both animals and humans. Overall, red and near infrared light has been repeatedly shown to have positive effects on cell function in www.mitoredlight.com...
Page 30
When our cells have more The specific photons found in red energy, they simply perform better and and near infrared light interact with a the body follows suit! photoreceptor within our cells called www.mitoredlight.com...
DO NOT wash electrical parts with water electrical power outlet. If it is to be used or other liquids. in the vicinity of water, we recommend using an electrical outlet protected by Ground Fault Circuit Interrupter (GFCI). www.mitoredlight.com...
Page 32
DO NOT cover the cooling fans while it could be exposed to flammable operating the light. or combustible products or vapors. Explosion or fire may occur. DO NOT store or use your device in hot temperatures exceeding 130 degrees Fahrenheit. www.mitoredlight.com...
Please wash hands after use. electrical waste. Please recycle your equipment at the time of disposal to help conserve natural resources and protect human health and the environment. www.mitoredlight.com...
180 days, buyer will be responsible for To obtain warranty service, you must product shipping charges and related first contact us at info@mitoredlight. coverage while in transit to Mito Red. com to determine the problem and Please retain the tracking information the most appropriate solution for you.
If the returned product is damaged in any way or returned in an unsellable No RMA is required. Please reference condition, the shipment will be refused your name and order number on the and returned to sender. return label. www.mitoredlight.com...
Page 36
User Manual and Instructional Videos This user manual and instructional videos can be found here: https://mitoredlight.com/pages/user-manual Follow Us! /mitoredlight MitoRedLight /mitoredlightofficial @mitoredlightofficial...
Need help?
Do you have a question about the MitoADAPT and is the answer not in the manual?
Questions and answers