Foppapedretti Circle i-Size Assembly Instructions Manual page 51

that it is attached correctly.
WARNING! The vehicle's seat belt buckle must not be placed in the lower guide of the
lap belt passage.
Insert the diagonal belt and the lap belt into the lower loop from the side near the
fastening buckle of the vehicle's seat belt (fig. 61).
Thread the lap belt on the opposite side of the car seat into the lap belt loop (fig. 62).
WARNING! The lap belt must run as low as possible over your baby's pelvis.
Insert the diagonal belt into the belt guide loop, making sure it is not twisted (fig. 63).
Mode B - INSTALLING WITH 3-POINT SEAT BELT
Press the ISOFIX release buttons and retract the ISOFIX connectors (fig.64).
Place the car seat on the car's seat. Push the car seat against the backrest of the
passenger seat. There must not be any space between the backrest of the passenger
seat and the car seat (fig. 65).
Place the child into the car seat. Adjust the headrest to the appropriate height. Pull the
vehicle's seat belt and, running it across in front of the child, attach the buckle of the
vehicle 's seat belt, inserting the tip into the buckle (fig. 66). A "click" will indicate that
it is attached correctly.
WARNING! The vehicle's seat belt buckle must not be placed in the lower guide of the
lap belt passage.
Insert the diagonal belt and the lap belt into the lower loop from the side near the
fastening buckle of the vehicle's seat belt (fig. 67).
Thread the lap belt on the opposite side of the car seat into the lap belt loop (fig. 68).
WARNING! The lap belt must run as low as possible over your baby's pelvis.
Insert the diagonal belt into the belt guide loop, making sure it is not twisted (fig. 69).
For the safety of the child, check before every journey that:
• Both ISOFIX connectors are hooked into the appropriate anchoring points, and both
indicators are green;
• The car seat is firmly installed on the car;
• The lap belt is inserted into the respective "lap belt guide" loops placed on the two
sides of the car seat;
• The diagonal belt, on the buckle side of the vehicle's seat belt, is correctly inserted
into the lap belt guide loop;
• The diagonal belt is inserted into the upper diagonal belt guide loop of the headrest
from the belt retractor side;
• The buckle is properly fastened and the belt is not twisted.
• ENGLISH •
INSTALLATION IN THE VEHICLE
51