Page 1
QUICK START INSTRUCTIONS QUEST For complete product information, scan here: READ AND SAVE THESE INSTRUCTIONS FOR A COMPLETE MANUAL, GO TO QUESTCLIMATE.COM/MANUALS This guide is provided to acquaint you with the dehumidifier so that installation, operation and maintenance can proceed successfully.
ASSEMBLY & INSTALLATION Thanks for purchasing a Quest 100 dehumidifier. For a complete manual, visit QuestClimate.com/manuals. Please follow these steps to successfully assemble and install your new dehumidifier. UNPACK BOX REGISTER WARRANT Y AT THERMASTOR.COM/REGISTRATION IMPORTANT! RETAIN SHEET OF CARDBOARD UNDER MACHINE TO PREVENT SCRATCHING.
Page 3
Section 13 on how to order a pump kit. B. See manual for more details. VERIFY WALL OUTLET IS CORRECT Specifications @ 80 F / 60% RH VOLTAGE AND AMPERAGE. QUEST 100 UNIT 4041870 Blower 280 CFM @ 0.0’WG...
ADJUST HUMIDIT Y. A. Use the up and down arrows on the control board to set desired relative humidity. 50% is recommended. B. Press and release terminal control button until light is not illuminated for control board. DARK MODE DEFROST LIGHT Pressing the dark mode button will turn off The light over the snowflake will all lighting on the control.
QUEST 100 DEHUMIDIFIER READ AND SAVE THESE INSTRUCTIONS • The device is designed to be installed INDOORS IN A SPACE THAT IS PROTECTED FROM RAIN AND FLOODING. • Install the unit with space to access the back or side panels for maintenance and service. DO NOT INSTALL UNIT WITH THE SERVICE PANELS INACCESSIBLE.
Need help?
Do you have a question about the 100 and is the answer not in the manual?
Questions and answers