Pentair AND 1060G Instruction, Installation, Maintenance And Repair Manual

Asme plain steel expansion tanks for heating & cooling systems

Download this manual

1060 AND 1060G SERIES

(Vertical and Horizontal Mount)

ASME PLAIN STEEL

EXPANSION TANKS FOR

HEATING & COOLING SYSTEMS

INSTRUCTION, INSTALLATION, MAINTENANCE AND REPAIR MANUAL

NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible

party who maintains the system.

Need help?

Do you have a question about the AND 1060G and is the answer not in the manual?

Page 1 INSTRUCTION, INSTALLATION, MAINTENANCE AND REPAIR MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains the system. Part #A-03-328 | © 2012 Pentair Ltd. | 11/19/12...
Page 2 SECTION 2 ITEM 1060 1060 & 1060G SERIES MODELS DATED NOVEMBER 2012 SUPERCEDES MAY 2010 STEPS & PROCEDURE: CALIFORNIA PROPOSITION 65 WARNING: • Visually inspect tank for damage, which may occur during This product and related accessories transit. contain chemicals known to the State of California to cause • Install sight-glass trim as required by design engineer.
Page 3 THIS PAGE INTENTIONALLY LEFT BLANK...
Page 4 WARRANTY Seller warrants equipment (and its component parts) of its own manufacture against defects in materials and workmanship under normal use and service for one (1) year from the date of installation or start-up, or for eighteen (18) months after the date of shipment, whichever occurs first.