Table of Contents
Advertisement
Tighten the lock nuts against the
3.
housing hand-tight using a SW17
open-end wrench.
Hold the appliance foot firmly
and do not adjust the height.
4.7 Connecting the device
electrically
Remark:Your domestic electrical
installation for this appliance must
comply with local legal and safety
regulations and must include an
earth leakage circuit breaker.
Insert the mains plug of the
1.
appliance's connecting cable into
a socket in the vicinity of the
appliance.
The connection data for the device
can be found in the technical data
→ Page 58 .
Check the mains plug for tightness.
2.
Set up and connectNL
17
Advertisement
Table of Contents
