Table of Contents
Advertisement
19.1 Emergency release
Unlock door
Required:The drain pump is empty.
→ Page 41
1. ATTENTION!Running water can
lead to material damage.
▶ Do not open the door if water is
visible behind the glass.
Pull the emergency release
downwards with the aid of a tool
and release.
aThe door lock is unlocked.
Insert the service cover and click
2.
into place.
Close the service cover.
3.
20 Transporting,
hit and throw
20.1 Disassemble the device
Close the tap.
1.
Empty the water supply hose.
2.
Put the device in standby mode.
3.
→ "Putting the device to sleep
(standby mode)", page 35
Remove the plug
4.
from the socket.
device from it
Transport, storage and disposalNL
Allow the suds to drain.
5.
→ "Clean the drain pump",
page 41
Remove the hoses.
6.
20.2 Install transport protection
devices
To avoid transport damage, secure
the device with transport protection
before transport.
Remove the 4 cover caps using a
1.
screwdriver.
Save the covers.
Install the 4 transport protection
2.
devices.
→ "Remove transport protection",
page 14
20.3 Restarting the Device
For more information, see
▶
→ "Setup and connection",
page 13 and
→ "Start wash cycle without
laundry", page 21 .
55
Advertisement
Table of Contents
