Maintenance - Vacmaster PROFESSIONAL VJF608PF 0202 Operator's Manual

6. Verify that the switch is in the 'O' OFF position before plugging the power cord into the power
outlet. Plug the power cord into the outlet (Fig. 4 & 5).
power cord from the outlet (Fig. 7).
1
EMPTYING THE COLLECTION TANK
WARNING:
BEFORE REMOVING THE POWERHEAD FROM COLLECTION TANK.
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Disconnect the hose from the vacuum (Fig. 2).
3. Undo the latches and remove the powerhead from the collection tank (Fig. 3). Place powerhead
on a soft, clean surface upside down.
4. Clear all dirt or debris from the collection tank and hose into a proper waste container (Fig. 4).
6. Check the hose, accessories, and power cord to ensure that they have not been damaged.
7. Place the powerhead back onto the collection tank and secure latches.
IMPORTANT!
CARTRIDGE FILTER FOR DRY VACUUMING.
NOTICE!
tears; replace it immediately.
STORAGE
Before storing your vacuum, the collection tank should be emptied and cleaned. The accessories
should be cleaned and stored so they can be readily available when needed. Store the wet/dry
vacuum indoors.
REPAIRS
only identical replacement parts.

MAINTENANCE

2 3
ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET
4
14
ALWAYS USE THE