Maintenance - Vacmaster VJE1412SW 0202 Operator's Manual

Wet/dry vacuum
Table of Contents

Advertisement

Available languages

Available languages

5.The included attachments lock together to prevent them from detaching during use. Connect the
desired attachment onto the end of the hose or extension wand by aligning the tabs and push
6. Verify that the switch is in the 'O' OFF position before plugging the power cord into the power
2
EMPTYING THE COLLECTION TANK
WARNING:
BEFORE REMOVING THE POWERHEAD FROM THE COLLECTION TANK.
powerhead on a soft, clean surface upside down.
6. Check the hose, accessories, and power cord to ensure that they have not been damaged.
7. Place the powerhead back onto the collection tank and secure latches.
IMPORTANT!
THE CARTRIDGE FILTER FOR DRY VACUUMING. If the machine is used without the cartridge
NOTICE!
tears; replace it immediately.

MAINTENANCE

3
ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET
4
13
ALWAYS USE

Advertisement

Table of Contents
loading

Table of Contents