Intrusion Detection - Abus IPCS28581A User Manual

Trigger alarm output
When an event is triggered, existing alarm outputs on the camera can be activated. The behaviour of the
alarm output can be set under "Events / Alarm output".
Trigger recording
Enable this in order to record motion detections onto an SD card.

8.6.9 Intrusion detection

Enable intrusion detection:
Preview video:
Max. size:
Min. size:
Detection area:
Delete:
Detection target
This menu item is the setting for object detection. Object detection detects people and vehicles on a neural
basis.
The intrusion detection function triggers an event if an object stays in the
area to be monitored for longer than the set time.
configure the area to be monitored
This function determines the maximum size of the object to be detected. This is done
by drawing a rectangle in the preview video. The rectangle can be drawn anywhere in
the preview video.
This function determines the minimum size of the object to be detected. This is done
by drawing a rectangle in the preview video. The rectangle can be drawn anywhere in
the preview video.
The area to be monitored can be drawn in the video image (quadrilateral area).
Operation: Press button -> set corner points using left mouse button (max. 4) -> press
right mouse button to finish drawing
delete the area.
129