Specification; Component Names - NSK Varios 170 Operation Manual

1. Specification

Varios 170
Input Voltage
Power Supply Frequency
Vibration Frequency
Maximum Output
Lighting
Use Environment
Store Environment

2. Component Names

Varios 170 ( Non-Optic )
1
3
4
6
* Operation Principle
A sinusoidal electrical signal, at ultrasonic frequency ( f > 20kHz ), is delivered by the generator. This signal is applied to the
'piezoelectric ceramic' located inside the transducer. Piezoelectric ceramic converts this signal into mechanical vibrations.
These vibrations are at the same ultrasonic frequency as the electrical signal. The mechanical vibrations are propagated
towards the distal end of the transducer. The "TIP" insert, which is attached at the distal end of the transducer, vibrates at
ultrasonic frequencies and makes it possible to achieve the aimed purpose.
AC 24 V ± 10%
50 / 60 Hz
28 - 32 kHz
11 W
Varios2 : No
Varios2 LUX : Yes
Temperature : + 10 - 40 °C
Humidity : 30 - 75 %
Atmospheric pressure : 700 - 1060 hPa
Temperature : - 10 - 60 °C
Humidity : 10 - 85 %
Atmospheric pressure : 500 - 1060 hPa
Varios 170 LUX ( Optic )
2
5
No.
1
2
3
4
5
OPTION 6
7
7
3
1
Parts Name
Varios2 Handpiece ( Non-Optic )
Varios2 LUX Handpiece ( Optic )
Handpiece Cord (Unshielded 2M)
( Optic or Non-Optic )
Sterilization Case
Tip Wrench
Tip (G4, G8, G16)
O-Ring
Tip Cover S (Option)
2
Quantity
1
1
1
3
1
2
1