Maintenance And Care - Kenmore REVITALITE KW4070 Use & Care Manual

Always follow all safety precautions when performing maintenance to the carpet cleaner.
WARNING
Electrical Shock and Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the carpet cleaner. Failure to
do so could result in electrical shock or personal injury from carpet cleaner suddenly
starting.
CARPET CLEANER INTERIOR CLEANING
1. Turn off and unplug carpet cleaner. Fill
the clean water tank with warm tap
water and then empty it all to rinse. Then
fill again with warm tap water. Reinstall
the clean water tank to the unit.
2. To flush and rinse the carpet cleaner,
turn on the unit and press the spray
trigger for 15 seconds while making
back and forth passes on a section of
carpet.
3. Release the spray trigger and vacuum
up the water.
4. Empty the dirty water tank.
CLEANING EXTERIOR AND ATTACHMENTS
1. Turn off and unplug carpet cleaner. DO
NOT drip water on carpet cleaner.
2. To clean exterior, or to reduce static
electricity and dust build-up, wipe outer
surface with a clean, soft cloth that has
been dipped in a solution of mild liquid
detergent and water, then wrung dry.
Wipe dry after cleaning.

MAINTENANCE AND CARE

- 18 -
NOTE:
Wash attachments in warm
soapy water, rinse and air dry. Do not
clean in dishwasher.