Kenmore REVITALITE KW4070 Use & Care Manual page 20

WARNING
Always unplug power cord from
electrical outlet before performing
maintenance to the carpet cleaner.
To maintain efficient cleaning, the
brushrolls must be kept free of carpet fiber,
string, or hair build-up. If the brushrolls
are wrapped with hair or debris, follow
below steps to check and clean brushrolls.
Cleaning the brushrolls periodically is
recommended for best performance.
1. Turn off and unplug carpet cleaner.
2. Grip the two nozzle cover release tabs
and pull up with force to remove the
nozzle cover. Rinse the nozzle cover and
allow it to dry before reinstallation.
Nozzle Cover
Release Tabs
Nozzle
Cover
CLEANING THE BRUSHROLLS
3. Use a proper tool (e.g. a comb) to brush
out any build-up entangled around the
brushrolls.
4. When finished cleaning, reinstall the
nozzle cover. First lock the two tabs
on the nozzle cover into the slots on
the front edge of the nozzle as shown.
Then lock the nozzle cover into place by
rotating it down until a click is heard.
I
NOTE:
Make sure the nozzle cover is
properly installed.
- 20 -
II
I