Advertisement
Mounting Considerations
This device should be mounted in a location that is not exposed to extreme temperatures or conditions. The
temperature range for this device is listed in the product specifications
exposure to temperatures exceeding the specified temperature range, in storage or operating conditions, may
cause device failure. Extreme-temperature-induced damage and related consequences are not covered by the
warranty.
• You must mount the device in a location where it will not be submerged.
• You must mount the device in a location with adequate ventilation so it does not trap heat.
• You must mount the device at least 2.54 cm (1 in.) from cables and other potential sources of interference.
• You must mount the device in a location that allows room for the routing and connection of all cables.
• If needed, you can install this device on an optional mounting bracket that holds a Garmin BlueNet 30
gateway and a Garmin BlueNet 20 switch. Contact your local Garmin dealer or go to
purchase this bracket.
Connection Considerations
Device and Port Overview
Item Description
Power button
Power cable port
Garmin Garmin
BlueNet cable ports
Optional grounding
location
2
NOTICE
Notes
You must connect this device to a 12 to 24 Vdc power source using the
included cable
You can connect a Garmin BlueNet device to any of these ports.
NOTE: This device is compatible with only Garmin BlueNet devices. If you have
one or more legacy Garmin Marine Network devices, you must also install a
Garmin BlueNet 30 gateway (sold separately) so the devices can communicate
properly.
If necessary, you can connect the device to the water ground of the boat to help
avoid interference
(Additional Grounding Consideration,
(Specifications,
page 5). Extended
buy.garmin.com
page 3).
to
Advertisement
