Table of Contents
Advertisement
User control — Image menu
•
RGB (16 - 235),
•
REC709,
•
REC601
Wall Color
Set the wall color of the projector to achieve best color performance for a specific wall. The available options
are:
•
Off (default),
•
Blackboard,
•
Light Yellow,
•
Light Green,
•
Light Blue,
•
Pink,
•
Gray
If Auto Wall Color is selected, the projector automatically adjust the image color to fit the color of the projection
screen. The auto adjustment is performed via the built-in camera. Please make sure the camera is not
covered by any subjects.
Custom RGBCMY
Change the color of a projected image by adjusting each color component in the image. The adjustable color
includes Red, Green, Blue, Cyan, Yellow, and Magenta (R / G / B / C / Y / M).
Image 8–1
•
Auto Test Pattern: Enable the function to view a specific color pattern while adjusting.
•
R / G / B / C / M / Y: Select a color for further adjustment.
•
Hue: Adjust the hue of the selected color. The value reflect the number of degrees of rotation around the
chromaticity diagram from the original color. Increasing value indicates counterclockwise rotation, and
decreasing value, clockwise rotation.
•
Saturation: Adjust the saturation of the selected color. The value indicates the color shifts from or towards
the white in the center of the chromaticity diagram.
•
Gain: Adjust the gain of the selected color. Increase the value to brighten the image (add white to a color)
or decrease the value to darken the image (add black to a color).
•
Reset: Reset the function settings to factory default values.
Custom White
Adjust the white color performance via setting the Red, Green, and Blue values.
•
Auto Test Pattern: Enable the function to view the white color pattern while adjusting.
•
Red / Green / Blue: Adjust the red, green, and blue colors to optimize the white color performance.
•
Reset: Reset the function settings to factory default values.
54
R5914653 /05
G62
Advertisement
Table of Contents
