•
First Input: Select a signal as the first input source. Once the selected source is activated, the OSD menu
lists out the signal's Resolution, Horz Refresh (horizontal refresh rate), and Color Space.
•
Second Input: Select a signal as the second input source. Once the selected source is activated, the OSD
menu lists out the signal's Resolution, Horz Refresh (horizontal refresh rate), and Color Space
•
Backup Input Status: Display the function status. The Backup Input Status is active when meeting the
following conditions:
-
Auto Switch is checked.
-
The two sources are with the same timing specification.
-
The two sources are active.
-
Projector is displaying one of the two sources.
Note on backup input function:
•
Only HDMI1, HDMI2, DVI, and HDBaseT inputs support the Backup Input function. The 3G-SDI input does
not support the Backup Input function.
•
To activate the Backup Input function, the conditions below must be met between two backup input
sources (First Input and Second Input): Resolution, Horz Refresh (horizontal refresh rate), Color
Space, and HDR data must be the same.
Image 7–2
•
If the conditions above are met, the Backup Input Status option in the OSD menu will show "Active".
Image 7–3
Example cases backup input
Case 1: backup input active with splitter
Image 7–4
•
Useful for displaying uninterruptedly content in live show, exhibition and critical control rooms.
•
Backup Input Status is Active in same Resolution, Color Space and close Horizontal refresh.
User controls — Installation
R5914653 /05
G62
45