Philips 24B1U5301H User Manual page 9

Business monitor
Table of Contents

Advertisement

5. Now you will be able to see "Realtek
USB Ethernet Network Adapter"
from your program installed list.
6. We recommend to periodically visit
the above web link to check for the
availability of the most updated
driver.
Note
Please contact Philips service hotline for
Mac address clone tool as necessary.
5
USB hub
To comply with International energy
standards, the USB hub/ports of this
monitor are disabled during Standby
and Off modes.
Connected USB devices will not work in
this state.
To permanently put the USB function
in "ON" state, please go to OSD Menu,
then select "USB standby mode", and
switch it to "ON" state. Somehow if your
monitor reset to factory setting, ensure
to select "USB standby mode" to "ON"
state in OSD menu.
6
USB charging
This monitor has USB ports capable
of standard power output including
some with USB Charging function
(identifiable with power icon
can use these ports to charge your
Smart phone or power your external
HDD, for example. The monitor must be
powered ON at all times to be able to
use this function.
Some select Philips monitors may not
Power or Charge your device when it
enters to "Sleep/Standby" mode (White
power LED blinking). In that case, please
enter to OSD Menu and select "USB
Standby Mode", then, turn the function
to "ON" mode (default=OFF). This will
then keep the USB power and charging
functions active even when the monitor
is in sleep/Standby mode.
If you Turn OFF your monitor via the
power switch at any given time, all the
USB ports will power OFF.
USB 2.4Ghz wireless devices, such
as, wireless mouse, keyboard, and
headphones, maybe have interference
by the high-speed signal of USB3.2
devices, which may result in a decreased
efficiency of the radio transmission.
Should this happen, please try the
following methods to help reduce the
effects of interference.
). You
7

 

  


 
 

Note
Warning
Try to keep USB2.0 receivers away
from USB3.2 connection port.
Use a standard USB extension cable
or USB hub to increase the space
between your wireless receiver and
the USB3.2 connection port.



Advertisement

Table of Contents
loading

Table of Contents