Table of Contents
Advertisement
13
Checking the Quality of the Weld
You can check the quality of the weld by means of a visual inspection and a bending
test.
The number and type or method of the tests to be performed and the acceptance
criteria are defined in respective standards for quality demands.
13.1
Carrying out Visual Inspection
‹ Carry out a visual inspection on all welding elements.
Condition
Good welded joint
Low spatters around the weld without
outer flaws
The weld pool forms a collar around
the flange of about 1 - 1.5 mm
©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
13 Checking the Quality of the Weld
Visual Inspection
Possible cause
Correct parameters
Corrective actions
none
37
Advertisement
Table of Contents
