To Set The Instrument To Local Or Remote (Lan) Control; To Preset The Instrument Settings - DBM ACE9600 Operating Manual

Advanced Channel Emulator
24
2. Press the IP address data field. Enter the desired IP address and
then press Enter, or press Clear to revert to the previous value.
3. Press the Submask address data field. Enter the desired submask
value, then press Enter, or press Clear to revert to the previous
value.
4. If applicable, press and enter the Gateway address, then press
Enter, or press Clear to revert to the previous value. Otherwise
leave it at the default.
5. The MAC address is unique for every instrument, and cannot be
modified.
6. After editing, press Return to store the new values and return to the
main menu.
To s e t th e in s tru m e nt to lo c al o r re m o te (LAN) c o n trol
The Local/Remote key toggles the instrument between local and
remote. During remote LAN operation, all keys except Local are
disabled. If currently in local mode, go to remote mode by pressing the
Local key on the front panel. The key text will change to Remote.
If in remote mode, pressing the Remote key brings the instrument back
to the local mode and activates the front panel keys. The key text will
change to Local.
When a LAN socket is established, the instrument automatically
changes to Remote mode.
To p re s e t th e in s tru m e n t s ettin g s
Pressing Preset causes the instrument to return to the default state
which is defined by the contents of the Preset State register.
Figure 2-7. LAN display
Operations Manual
dBm
ACE9600