Start And Shutdown Procedures; Starting The Ace9600; Shutting Down The Ace9600 - DBM ACE9600 Operating Manual

dBm
ACE600
Operations Manual
Advanced Channel Emulator
S ta rt a n d S h u td o wn P ro c e d u re s
S ta rtin g th e ACE9600
Press the Line on/off switch on the rear panel. Move the front panel
power switch to the on position. The LCD display will illuminate.
The instrument is usable immediately. However, it is recommended to
allow approximately 30 minutes warmup, then press Preset for best
performance.
S h u ttin g Down th e ACE9600
Move the front panel power to the standby position. There may be a
short delay before the instrument powers off.
If the ACE9600 is going to be off for an extended period of time, you may
wish to remove the main power by pressing the Line on/off switch on the
rear of the instrument.
15