Components - Stihl MS 362 C-M Technical Information

Technical Information 04.2013
1.

Components

3
2
1
Control unit (1)
Control center for the optimum adjustment of fuel
flow, the exact ignition timing and the memory
function.
Second pair of poles (2)
Supplies power to control unit and solenoid valve.
Wiring harness (3)
Connects control unit, solenoid valve, microswitch
and diagnostic jack.
Master Control Lever™ with stop switch
function (4)
Engine is shut down by operating the Master Control
Lever™. When the engine stops, the Master Control
Lever™ springs back to the normal run position F .
Ignition is automatically switched on again in this
position.
TI_04_2013_30_01_01.fm
4
Solenoid valve (5)
Electronically controlled solenoid valve meters fuel
in milliseconds – this allows a fuel flow rate between
0% and 100%.
Switch unit (6)
Identifies position of choke shutter – recognizes
start status
Diagnostic jack (7)
Connection for STIHL MDG 1 engine analyzer.
Page 3
5
7
6