Table of Contents
Advertisement
• Turn the power on, and then press and hold the
High Temp button for 3 seconds until
on the display.
- The default setting is on
on the display, the white LED stays on for 90
seconds after the cycle has finished.
- You can set the light setting to on the display
so that the dishwasher keeps the white LED on
until the door is opened manually. (and the
Auto Open Dry feature is set to OFF).
Red LED
• Flashes if the appliance encounters an error. For
more information about error codes, see the
TROUBLESHOOTING section.
shows
ON
. When
shows
OFF
OFF
OPERATION
35
Advertisement
Table of Contents
