Table of Contents
Advertisement
INSTALLATION
16
by steam or condensation when the door is
opened.
• Install the moisture barrier tape to the underside
of counter top to protect the counter top from
condensation when the appliance opened.
1
Clean and dry the underside of the counter top
on which the tape will be attached.
2
Remove the protective film from the tape.
3
Install the tape to the underside of the counter
top.
NOTE
• Moisture barrier tape is included in the manual
assembly bag.
• If the counter top is made of granite or
waterproof materials, the moisture barrier tape
is not required.
• Condensation may occur on the underside or
along the front edge of the counter top when the
room temperature is low.
Installing Fleece Tape
(Case A) Mounting the sliding panel
Attaching fleece tape between the dishwasher
door and the door panel will reduce the friction
when the door slides up and down.
1
Install the fleece tape close to the bracket
openings to make sure the door slides
smoothly.
1 5 0 m m
3 4 5 m m
2
Peel the fleece tape strips off the carrier and
attach them to the door.
Levelling the Appliance
Removing the Sliding Links
(Case B) Mounting the fixed panel
2 0 7 m m
1 7 0 m m
Advertisement
Table of Contents
