Sending A Still Image (Dcr-Trv80 Only) - Sony Handycam DCR-TRV70 Operating Instructions Manual

Messages
Message
DNS Error
The Requested URL
Could Not Found
Loading Error
Read-Only File in Directory
Unable to Delete the File
Check the File Status
Opening File Error
Read-Only File
This File is Locked
Enter User Name
and Password
Timeout
Disconnected Automatically
Loading...
Retry Later
Sending a still image
– DCR-TRV80 only
Message
Input at Least One Letter
Send Error
Unknown device
Cause and/or Corrective Actions
• The URL may be wrong.
• The DNS entry on the PPP screen during manual setup may be
wrong. Check this item.
• Connect to the page again after a while.
Tap on the upper right of the LCD screen, then tap
menu
You may be unable to delete files modified with a computer by using
your camcorder.
User authentication is required to access the page. Enter your user
name and password.
Check the Network Options setup (p. 65).
The page memo cannot be stored while the unit is loading a web
page. Store it again after the web page has been loaded (p. 114).
Cause and/or Corrective Actions
Enter the passkey between one to 16 characters.
• Disconnected from the connected Bluetooth device
c After confirming the connection to the Bluetooth device, send the
still image again.
• The radio waves between your camcorder and the connected device
were blocked while sending a still image.
c Confirm the radio wave status, and send the still image to the
device again.
• The distance between your camcorder and the connected device
become too far to communicate each other while sending a still
image.
c The distance that your camcorder and the connected device is
within about 10 m (33 feet). Put your camcorder and the connected
device within the distance that they can communicate each other.
During search for a Bluetooth device, [Cancel] was tapped.
c Search for Bluetooth devices again.
.
END
143