Sony Handycam DCR-TRV70 Operating Instructions Manual page 125

Transferring still images with Bluetooth function
– Image Transport
(5) Tap –/+ to display the desired still image.
– : To see the previous image
+ : To see the next image
(6) Tap SEND.
The history of recently connected Bluetooth devices appears.
If the history does not appear, tap [Search].
The message "Searching for Bluetooth Devices" appears on the screen and
your camcorder starts searching for available Bluetooth devices. When the
search is complete, the list of available Bluetooth devices appears.
To display the addresses and the category of available devices, tap [More
Info.].
Search for the devices takes about 10 to 60 seconds.
If your camcorder cannot search any Bluetooth devices available, the list does
not appear. Check the devices, then tap [Search] again.
If you want to cancel the search, tap [Cancel].
,
125