Ending The Remote Camera - Sony Handycam DCR-TRV70 Operating Instructions Manual

Using as a Remote Camera

Ending the Remote Camera

(1) Tap
(2) Tap EXIT on the LCD screen of your camcorder to return to FN.
Notes
•When START/STOP or PHOTO is pressed, melody or shutter sound is output even if
you set BEEP in
•Camera recording lamp lights up during recording even if you set REC LAMP in
to OFF in the menu settings.
•You cannot select RMT CAM during the following operations:
– MEMORY MIX
– Tape recording
– Recording on "Memory Stick"
– Using USB Streaming function
•If you set Pan/Tilt to ON in RMTCAM SET in
use the following:
– Digital zoom
– SteadyShot (The indicator flashes.)
•Remote Camera cannot be canceled during the following. After finishing recording,
cancel Remote Camera.
– Tape recording
– Recording on the "Memory Stick"
Notes on Pan/Tilt
• The range in which Pan/Tilt can be performed varies depending on the zoom
position. (Changing the zoom from Wide to Tele gives a wider Pan/Tile range.)
• If Pan/Tilt is set to ON in RMTCAM SET in
Remote Camera on or off, the zooming bar may appear in a different position. This is
not a malfunction.
•The picture quality deteriorates slightly. If low picture quality is a problem, set
Pan/Tilt to OFF in RMTCAM SET in
then try to operate the connected device again.
•Set Pan/Tilt to ON in RMTCAM SET in
Remote Camera (The default setting is ON.). To change the Pan/Tilt setting during
remote operation of your camcorder, first quit Remote Camera and then change the
setting in the menu.
• When you exit Remote Camera after altering the view angle with Pan/Tilt operation,
the view angle returns to the center.
•If you set the zoom to Tele and change the view angle, and then set the zoom to Wide,
the angle of view may return towards the center.
• The pan range with the zoom set to wide angle is narrower in Wide mode than usual.
About Bluetooth devices you can connect
Refer to the following web page:
"http://www.myimagecam.com/"
122
END on the LCD screen of your camcorder to return to PAGE3.
to OFF in the menu settings.
in the menu settings, you cannot
in the menu setting when you turn
in the menu settings on your camcorder, and
in the menu settings before operating