Functions / Error Analysis; Selecting The Temperature Unit; The Memory Function (Memory Mode) - Silvercrest 71652 Operation And Safety Notes

Operation / Functions / error analysis
4. You can start a new measurement by pressing the
"MEM / SET" button
measured time.
In order to return to standard mode, proceed as follows:
1. Press the "FOREHEAD" button
button
3
display
5
and time, as well as the
2. You are now in standard mode again.

Functions / error analysis

Selecting the temperature unit

Press and hold down the "EAR" button
"FOREHEAD" button
appears behind the temperature display. Switching
from "°F" to "°C" is possible with the same procedure.

The memory function (memory mode)

IMPORTANT!
The current measurement is always stored in the last storage
space. When all storage spaces have been occupied, the
oldest measurement is always deleted from the memory.
24 GB/IE
to delete the previously
1
repeatedly at the same time until the LC
again shows the room temperature, date
4
and the "EAR"
4
symbol (Illustration D).
at the same time until "°F"
and the
3