Functions / Error Analysis; Selecting The Temperature Unit; The Memory Function (Memory Mode) - Silvercrest 106635 Operating Instructions Manual

©

Functions / error analysis

©

Selecting the temperature unit

Press and hold down the "EAR" button
"FOREHEAD" button
appears behind the temperature display. Switching
from "°F" to "°C" is possible with the same procedure.
©

The memory function (memory mode)

IMPORTANT!
The current measurement is always stored in the last storage
space. When all storage spaces have been occupied, the
oldest measurement is always deleted from the memory.
Measurements taken in ear and forehead mode are
automatically stored in the appliance. The measured
values are available again along with information on the
date, time and measurement mode when the "MEM / SET"
button is operated in standard mode. Press the "MEM /
9
SET" button
9
measurement. The "Memory" symbol (memory mode), the
number of the measurement, date, time and measurement
mode will appear in the LC display
the "MEM / SET" button
with its associated measured value will appear. A maximum
of 9 measurements can be stored.
In order to return to standard mode, proceed as follows:
24 GB
at the same time until "°F"
3
once to retrieve the value of the last
the next storage space along
9
and the
2
(Fig. F). By pressing
4