Specifications; Safety Warnings; Important Safety Instructions - Makita DEBDML815 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
LED
Dimensions
(L x W x H)
Rated voltage
Net weight
Battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Some of the battery cartridges listed above may not be available depending on your region of residence.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Operating time
Battery cartridge
BL1430 / BL1430B
BL1460B
BL1830 / BL1830B
BL1860B
• The operating times in the above table are a rough
guideline. They may differ from actual operating
times.
Symbols
The followings show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Indoor use only.
Only for EU countries
Ni-MH
Due to the presence of hazardous com-
Li-ion
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household waste!
In accordance with the European Directive on
waste electrical and electronic equipment and on
accumulators and batteries and waste accumu-
lators and batteries, as well as their adaptation to
national law, waste electrical equipment, batteries
and accumulators should be stored separately
and delivered to a separate collection point for
municipal waste, operating in accordance with the
regulations on environmental protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Operating time
17 hours
35 hours
24.5 hours
54 hours
227 mm x 79 mm x 116 mm
BL1415N / BL1430 / BL1430B / BL1440 / BL1450 / BL1460B
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Battery protection system
The tool is equipped with the protection system, which
automatically cuts off the output power for long ser-
vice life. The light goes off during operation when the
remaining battery capacity gets low. This is caused by
the activation of the protection system and does not
show trouble. Remove the battery cartridge from the
tool and charge it.

SAFETY WARNINGS

IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
When using electric tools, basic
safety precautions should always be followed to
reduce the risk of fire, electric shock, and per-
sonal injury, including the following:
READ ALL INSTRUCTIONS.
1. Do not look into the light, or do not expose the
light to eyes. Eyes may be damaged.
2. Do not cover or clog the lit tool with cloth or
carton, etc. Covering or clogging it may cause a
flame.
The tool is not waterproof. Do not use it in
3.
damp or wet locations. Do not expose it to rain
or snow. Do not wash it in water.
Do not touch the inside of the flashlight head
4.
with tweezers, metal tools, etc.
Do not give the tool a shock by dropping,
5.
striking, etc.
6. When the tool is not in use, always switch off
and remove the battery cartridge from the tool.
3 ENGLISH
DML815
0.5 W x 4
D.C. 14.4/18 V
0.56 - 0.93 kg