Empire Comfort Systems DVCC32BP30N-3 Installation Instructions Manual page 13

FBB10 BLOWER KIT INSTALLATION (OPTIONAL) (CONT'D)
10. Remove ten screws and lift burner assembly. Disconnect the
gas line. See Figure 13.
11. Remove the four #10 x 1/2 screws securing the left latch
assembly to the underside of the firebox and set aside.
See Figure 14.
12. Install blower through firebox cutout. See Figure 15.
13. Install the blower onto the prebent brackets on the blower
plate. Ensure the Velcro connects to secure the blower in
place. See Figure 16.
Back side of Blower
showing Velcro
37606-4-0718
Figure 13
Figure 14
Figure 15
Figure 16
14. Reinstall the left latch assembly removed in step 11.
See Figure 14.
15. Install thermo disc by snapping into valve bracket burner
assembly. See Figure 17.
16. Reconnect gas line and turn gas on. Check for leaks.
17. Reinstall the burner assembly and ten screws removed in
step 10. See Figure 13.
18. Reinstall the burner and four screws removed in step 9.
See Figure 12.
19. Reinstall the log support and secure it with metal plate and
two screws removed in step 8. See Figure 11.
20. Replace burner cover removed in step 7. See Figure 10.
21. Replace liner and bracket if removed in steps 5 and 6.
See Figures 8 & 9.
22. Replace modern cover removed in step 4. See Figure 7.
23. Replace decorative media.
24. Turn on power.
25. Reinstall the glass frame removed in steps 2 and 3.
See Figures 5 & 6.
26. Replace barrier screen removed in step 1. See Figure 4.
1
3
BLOWER ASSEMBLY PARTS LIST
INDEX PART
NO. NO
1 R2804
2 R7649 FAN, CONTROL L120-20
3 R2099 CORD SET, 30 INCHES
4 R4192
5 R4186 RHEOSTAT, 3.0 AMP 115 VAC
6 10088 RHEOSTAT BOX BRACKET
7 R11768 WIRE HARNESS, FAN CONTROL
Figure 17
5
6
4
DESCRIPTION
BLOWER ASSEMBLY
RHEOSTAT, KNOB
Figure 18
2
7
QTY
1
1
1
1
1
1
1
Page 13