Empire Comfort Systems DVCC32BP30N-3 Installation Instructions Manual page 12

Direct vent zero clearance gas fireplace heater
Table of Contents

Advertisement

FBB10 BLOWER KIT INSTALLATION (OPTIONAL) (CONT'D)
4.
Remove the modern cover by lifting off. See Figure 7.
(At installation modern cover is behind valve)
5.
Remove the two screws securing the liner brackets to the
firebox as shown in Figure 8. (If liner is installed)
6.
Remove liners as shown in Figure 9. (If installed)
Page 12
Figure 7
Figure 8
Figure 9
7.
Remove burner cover by lifting off. See Figure 10.
8.
Remove log support by unscrewing two screws securing the
metal plate to the log support. Retain log support and screws
for reassembly. See Figure 11.
9.
Remove the four screws securing burner and slide to right
then lift burner off. See Figure 12.
Figure 10
Figure 11
Figure 12
37606-4-0718

Advertisement

Table of Contents
loading

Table of Contents