Connections For An A/B Roll Editing System - Sony DSR-1800A Operating Instructions Manual

Connections for an A/B Roll Editing System

The following is an example configuration of A/B roll
editing system using the DSR-1800A/1800AP.
Main video monitor
Video signal generator
DME switcher
(DFS-500/500P,
etc.)
78
Connections for an A/B Roll Editing System
Editing control unit
(PVE-500, etc.)
DSR-1600A/1600AP (player 1)
Video signal
Audio signal
Reference video signal
Control signal
The purpose of the following figure is to clearly indicate
the flow of signals among the component devices in this
system. The specific connections and settings are
described beginning on page 79.
Source video monitor
DSR-1800A/
1800AP (recorder)
a) An I/O delay of several frames occurs on DME switchers and
other devices equipped with frame memory. It is therefore
necessary to connect an audio delay unit between the audio
mixer and the recorder VCR to adjust for the delay.
Audio system monitor
DPS-D7 or other delay
a)
unit
Audio mixer
(MXP-290, etc.)
UVW-1600/1600P,
etc.
(player 2)