Playback Procedure - Sony DSR-1800A Operating Instructions Manual

Playback Procedure

dB OVER dB dB OVER dB dB OVER dB dB OVER dB INPUT V:SDTI
0 0 0 0
0 0 0 0
VIDEO COMPOSITE
-12 1 -12 1 -12 1 -12 1
-20 0 -20 0 -20 0 -20 0 CH11/2
ANALOG AES/EBU
-1 -1 -1 -1 AUDIO
-30 -30 -30 -30
ANALOG AES/EBU
-40 -40 -40 -40 CH23/4
-2 -2 -2 -2
-60 1 -60 2 -60 3 -60 4 PB FS 48k44.1k32k
Note
When controlling this unit from an editing control unit connected to the
REMOTE connector (see page 21) of this unit, press the REMOTE button
turning it on. When not, turn off the button.
1
Insert a cassette.
For details of cassette insertion see page 24, and for usable cassette types
see page 22.
The cassette is automatically drawn into the unit. The STOP button will
light, and a few seconds later a still image will appear on the monitor screen.
2
Press the PLAY button.
This starts the playback operation. When the tape is played back all the way
to the end, the unit automatically rewinds it and then stops.
If the following indicators light when a cassette is loaded
Indicator
Cassette memory indicator The loaded cassette contains a cassette memory.
ClipLink indicator
NOT EDITABLE indicator
To perform the following operations
Operation
Stop playback.
Adjust the audio playback
level.
1
SDTI i.LINK
Y-R,B S VIDEO SDI SG
SDI SG
SDI SG
REC MODE 2CH4CH
2
It means:
There is ClipLink log data stored in the cassette
memory on the loaded cassette.
The tape was recorded in the DV format, or a
DVCPRO tape is inserted.
You cannot use it as a recording tape for editing.
Do this:
Press the STOP button.
The unit enters stop mode, and will automatically
switch to standby off mode after the time set with the
STOP TIMER menu item (see page 61).
Use the audio level control on the monitor.
REMOTE button
33
Playback