Sony DSR-1800A Operating Instructions Manual page 65

AUDIO CONTROL [Audio]: Settings related to audio
control
SHUTTLE MUTE [>Shutl mute]: Set the audio muting
conditions during shuttle playback.
AUDIO EDIT [>Audio edit]: Specify the type of editing for
audio signals.
DV PB ATT [>DV PB ATT]: When playing back a tape
recorded in consumer DV format, select whether to
attenuate the audio output level.
DIGITAL PROCESS [Digi. proc]: Settings related to digital
process
SYSTEM EE MODE [>System EE]: Select the bypass E-E
mode or system E-E mode.
SETUP BANK OPERATION [Setup Bank]: Settings related
to menu bank operations
RECALL BANK1 [>Recall 1]: Recall menu settings from
menu bank 1.
RECALL BANK2 [>Recall 2]: Recall menu settings from
menu bank 2.
RECALL BANK3 [>Recall 3]: Recall menu settings from
menu bank 3.
RECALL BANK4 [>Recall 4]: Recall menu settings from
menu bank 4.
SAVE BANK 1 [>Save 1]: Save current menu settings to menu
bank 1.
SAVE BANK 2 [>Save 2]: Save current menu settings to menu
bank 2.
SAVE BANK 3 [>Save 3]: Save current menu settings to menu
bank 3.
SAVE BANK 4 [>Save 4]: Save current menu settings to menu
bank 4.
Menu banks
This unit allows four different complete sets of menu settings to be saved in what are termed "menu banks" numbered 1 to 4.
Saved sets of menu settings can be recalled for use as required.
Description of settings
*OFF [>> OFF]: Not muted.
CUEUP or PREROLL [>> CUEUP]: Muted during cue-up or
preroll operations.
FULL [>> FULL]: Muted in shuttle mode.
CUT EDIT [>> Cut edit]: Cut editing (Discontinuity in audio
signal may result at the editing point, causing noise during
playback.)
*CROSS FADE [>> Cross]: Cross-fade
IN/OUT
FADE IN/OUT [>> Fade]: Fade in and fade out
IN OUT
OFF [>> OFF]: Do not attenuate.
*ON [>> ON]: Attenuate.
Description of settings
*OFF [>> OFF]: Bypass E-E (ordinary setting)
ON [>> ON]: System E-E
Description of settings
(1) Select the bank you want to recall, then press the k
button.
Message "RECALL OK?" appears.
(2) To recall, press the SET (YES) button.
To quit recalling, press the RESET (NO) button.
(1) Select the bank you want to save, then press the k
button.
Message "SAVE OK?" appears.
(2) To save, press the SET (YES) button.
To quit saving, press the RESET (NO) button.
65
Menu Contents