Controller Settings - Sonos Digital Music System User Manual

5-24
Line-In source level
From the Music menu, select System Settings>ZonePlayer Settings and touch
1.
OK.
Highlight the zone the audio component is connected to, and touch OK.
2.
Select Line-In Source Level, and touch OK.
3.
Choose the line-in level appropriate for this device, and click OK.
4.
The default (typical) line-in level for your device type automatically displays. You
can increase or decrease the level, but if the level is set too high, you may
experience clipping at higher volume levels.

Controller Settings

From the Music menu, select System Settings
scroll wheel to highlight the preference setting you wish to change.
OK Button
• Use this preference setting to choose the action that will occur when you select
a track, and press the OK button. The track can begin to play immediately (Play
Now), it can be added to the end of your music queue (Add to End of Queue),
or you can view an options menu (Show Menu) to select from one of the follow-
ing actions each time:
Sonos Digital Music System User Guide
>
Controller Settings and then use the